A heavy duty terminal crimper is an investment that can last for years if maintained properly. Like any precision tool, it requires care to ensure consistent performance and durability. Here are some practical tips for keeping your crimper in top shape.
- Regular Cleaning
After each use, wipe down the crimper to remove any debris, grease, or dirt that may have accumulated. Use a soft cloth or brush to clean hard-to-reach areas, particularly around the jaws and die sets. Keeping the tool clean prevents wear and ensures smooth operation.
- Inspect for Wear and Damage
Frequently check the crimper for signs of wear, such as chipped or deformed jaws. Damaged components can lead to poor-quality crimps or even damage the wire or terminal. Replace any worn parts immediately to maintain the tool’s efficiency.
- Lubricate Moving Parts
Apply a small amount of lubricant to the tool’s moving parts, such as the pivot points and handles. This reduces friction and ensures smooth operation. Be careful not to over-lubricate, as excess oil can attract dust and debris.
- Store Properly
When not in use, store the crimper in a clean, dry environment. Use a protective case or pouch to prevent damage from accidental drops or exposure to moisture. Avoid leaving the tool in direct sunlight or extreme temperatures, which can degrade its materials.
- Calibrate Regularly
Over time, the crimper’s dies may lose their precision. Regular calibration ensures that the tool delivers consistent pressure and creates reliable connections. Consult the manufacturer’s guidelines for calibration instructions or seek professional servicing.
Proper maintenance not only extends the lifespan of a heavy-duty terminal crimper but also ensures that it performs at its best when you need it. By adopting these simple practices, you can protect your investment and enjoy reliable performance for years to come.
Specifications
| Max. crimping force: | 60KN |
| Crimping range: | 10-300 mm2 |
| Stroke: | 17mm |
| Hydraulic oil: | Shell Tellus T15# |
| Ambient temperature: | -10 - 40℃ |
| Battery: | 18v 4.0Ah Li-Ion |
| Crimping cycle: | 3s-6s(depending on the connector size） |
| Crimp/charger: | Approx. 260 crimps (Cu150 mm2) |
| Charging voltage: | AC 100V〜240V; 50〜60Hz |
| Charging time: | Approx. 2 hours |
| OLED display： | display voltage, temperature, crimping times, errors information |
| Accessories: | |
| Crimping die (mm2): | 10.16.25.35.50.70.95.120.150.185.240.300 |
| Battery: | 2 pcs |
| Charger: | 1 pcs |
| Sealing ring of cylinder: | 1 set |
| Sealing ring of safety valve: | 1 set |
