The processing process of Rotary Table Intelligent Assembly Machine is similar to that of general lathe, but because the Rotary Table Intelligent Assembly Machine is a one-time clamping, Continuous active processing completes all turning processes, so the following aspects should be paid attention to. Reasonable selection of cutting parameters: For high-power metal cutting, the processed data, cutting things, and cutting conditions are the three major elements. These determine the processing time, tool life and processing quality. An economical and useful processing method must be a reasonable selection of cutting conditions. Three elements of cutting conditions: cutting speed, feed rate and cutting depth directly cause tool damage. With the improvement of cutting speed, the temperature of the tool tip will rise, and mechanical, chemical, and thermal wear will occur. The cutting speed is improved by 20%, and the tool life will be reduced by 1/2. The feed conditions and the wear behind the tool are associated with a very small range. But the feed amount is large, the cutting temperature rises, and the rear wear is large. It has less effect on the tool than the cutting speed. Although the effect of cutting depth on the tool is not as large as the cutting speed and feed amount, the hardening layer of the cutting data will also affect the life of the tool when the fine cutting is deep cut.
The user should select the cutting speed according to the processed data, hardness, cutting condition, data variety, feed rate, cutting depth, etc. The selection of suitable processing conditions is selected on the basis of these elements. Select high quality Rotary Table Intelligent Assembly Machine processing plant, regular, stable wear to reach the life is the ideal condition. However, in actual operation, the selection of tool life is related to tool wear, change of machining scale, appearance quality, cutting noise, processing heat and so on. When determining the processing conditions, the need to study according to the actual situation. For difficult processing materials such as stainless steel and heat-resistant alloys, coolant can be used or a good rigid blade can be used. Turning is a method of cutting the workpiece on the Rotary Table Intelligent Assembly Machine by using the workpiece related to the rotation of the tool. The cutting energy of turning is mainly supplied by the workpiece rather than the tool. Turning is a basic and common cutting method, which plays a very important role in production. Turning is suitable for processing the reverse appearance, most of the workpiece with the reverse appearance can be processed by turning, such as the cylindrical surface, the conical surface, the end face, the groove, the thread and the reverse forming surface, etc., the tool used is mainly the turning tool.
Rotary Table Intelligent Assembly Machine https://www.zjshuangzheng.com/Rotary-Table-Intelligent-Assembly-Machine.html
